Subscribe to newtondampproofing.comRSS Feed

Damp Proof Membranes – Wall

NEWTON NEWLATH 2000
Suitable for istallation on walls and our original and BBA certificated Damproofing Membrane. The Newlath 2000 is made High Density Polypropylene and  has a 5mm stud profile which creates the all important air gap between the surface to which it is applied and the new finishes. The thermally welded mesh on the front face of the Newlath 2000 creates a key for a dot and dab plasterboard finish or a direct  finish with plaster , render , Natural hydraulic lime or lime based render.
Avaiable in small 15m2 and large 40m2 rolls the Newlath 2000 membrane is simply fixed in  place using Newton Newlath Plugs and Newton mastic . Newlath 2000is easy to use and provides long term affective protection to the internal finishes.

John Newton & Company have a number of damp proof membranes suitable for use on walls. For further information or to discuss which product would be suitable with our Technical Department, please ring freephone 0800 068 0122

Our range of damp proof membranes can be used to treat conditions including: rising damp, penetrating damp, exterior and interior damp walls and damp problems in listed buildings

NEWTON NEWLATH 2000 Damp Proof Membrane

Our original and BBA certificated damp proof membrane

Newlath 2000 showed here semi-plastered and being fixed with a Newton Newlath Plug

Newlath 2000 showed here semi-plastered and being fixed with a Newton Newlath Plug

Newlath 2000 is made from High Density Polypropylene and  has a 5mm stud profile which creates the all important air gap between the surface to which it is applied and the new finishes. The thermally welded mesh on the front face of the Newlath 2000 creates a key for a dot and dab plasterboard finish or a direct  finish with plaster, render, natural hydraulic lime or lime based render. Available in small 15m2 and large 40m2 rolls the Newlath 2000 membrane is simply fixed in  place using Newton Newlath Plugs and Newton mastic . Newlath 2000 is easy to use and provides long term affective protection to the internal finishes.
Over 2 million metres of Newton Newlath 2000 have been sold in the UK alone!
 
 
NEWTON 503 MESH Damp Proof Membrane
 

The damp proofing membrane to choose when millimetres count!

 Newton 503 Mesh being used externally to damp proof a school

Newton 503 Mesh being used externally to damp proof a school

This product is a direct alternative to Newlath 2000. Made from High Density Polyethylene and formed in a 3mm stud profile this is the damp proofing membrane to choose where millimetres count.

It also comes in two roll sizes of 40m2 and 20m2 and at 1m wide it is ideal for installation to combat the affects of rising dampness with or without the inclusion of a damp proof course. In the alongside photo, it can be seen used externally to damp proof a school. Full details of this project can be viewed in the case studies tab.

 
 
  
NEWTON 503 Damp Proof Membrane
 
Newton 503 is mostly used on floors but in certain circumstances it is the ideal product for walls

Newton 503 is mostly used on floors but in certain circumstances it is the ideal product for walls

Newton 503 is a High Density Polyethylene membrane formed in a 3mm stud profile. This damp proofing membrane is mostly used on floors, but can be used on walls where the need for the thermally welded mesh is negated by the use of a free standing wall finish in front of the membrane. Used in this fashion the membrane acts as a vapour barrier protecting the finishes, and can be secured in place using very few fixing plugs.

 
 
 
 
NEWTONITE Damp Proof Membrane
 
Our original damp proof membrane, improved and developed

 
Aimed at those jobs where only a small amount of membrane is required the 10m2 roll
Newtonite can easily be installed as a DIY or by a builder

Newtonite can easily be installed as a DIY or by a builder

is light but robust making it very easily transportable, quick and easy to install by competent

DIY homeowners and builders. The High Density Polyethylene meshed damp proof membrane has a 3mm stud depth and at 1m high is perfect for the isolated rising or penetrating damp problems and covering persistent damp staining or salting once and for all to stop the internal finishes spoiling.

To view product files for all the products listed above, please go to www.newton-membranes.co.uk